The patent data are mapped by country using fractional counting and show the number of inventions for the fuel cell, clean hydrogen production and hydrogen storage sectors, by technology type and year of application.
Patents are strong indicators of innovation activity which can give very detailed insights into the state and direction of the science. This study, which combines the expertise of the International Energy Agency and the European Patent Ofice, is the most comprehensive, global and up-to-date investigation of hydrogen-related patenting so far.
Their patent portfolios are mainly focused on production by electrolysis and applications based on fuel cells but also extend to established technologies for the storage and distribution of liquid or gaseous hydrogen, an area of focus for these countries which plan to import stored hydrogen in the near future.
Technology will be at the heart of many of these changes, and nowhere more so than in the scale-up of hydrogen as a clean energy carrier. While strong policy will be needed to make low-emission hydrogen cost-competitive, it will not be possible without technology improvements across a value chain that touches nearly every part of the energy system.
The IPFs of hydrogen start-ups mainly target technologies primarily motivated by climate, such as electrolysis and fuel cells. However, about a third of them also show patenting activities in established technologies, usually in combination with IPFs in climate-motivated technologies.
The patent data clearly shows that established players are heavyweights in hydrogen patenting and are capable of expanding into new market segments. Automotive companies and chemical companies that are active in fuel cells and electrolysis are a clear example.
Patents filed for energy storage technologies - Our World in Data Figures in recent years are subject to a time lag; submitted patents may not yet be reflected in the data. Figures in recent years are subject to a time lag; submitted patents may not yet be reflected in the data. Our Worldin Data Articles by topic Latest About Donate All charts
The traditional charging pile management system usually only focuses on the basic charging function, which has problems such as single system function, poor user experience, and inconvenient management. In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV.
To reduce the safety risk associated with large battery systems, it is imperative to consider and test the safety at all levels, from the cell level through module and battery level and all the way to the system level, to ensure that all the safety controls of the system work as expected.
In addition to this, chargers should have their own safety controls so as to not impose a current that is higher than what the battery can handle and should be in constant communication with the battery to determine the health of the cells and the battery system in order to safely charge the system.
Hazardous conditions due to low-temperature charging or operation can be mitigated in large ESS battery designs by including a sensing logic that determines the temperature of the battery and provides heat to the battery and cells until it reaches a value that would be safe for charge as recommended by the battery manufacturer.
Under an extreme over-discharge condition, the dissolved copper ions deposit on the cathode, anode, and separator, and ultimately the system becomes an electrical wire instead of an electrochemical system, leading to a benign short circuit, making the cell or battery unusable.
However, these systems are still in the developmental stage and currently suffer from poor cycle life, preventing their use in grid energy storage applications. Flow batteries store energy in electrolyte solutions which contain two redox couples pumped through the battery cell stack.
In a recent study, Jin et al. (48) developed a CFD simulation of gas explosion hazards within a container-type ESS comprising Li-ion battery modules.
As the supporting infrastructure of the new energy vehicle system, charging piles will be ubiquitous in the future, and their safety and reliability are very key to the safe use of new energy.
New energy electric vehicles will become a rational choice to achieve clean energy alternatives in the transportation field, and the advantages of new energy electric vehicles rely on high energy storage density batteries and efficient and fast charging technology. This paper introduces a DC charging pile for new energy electric vehicles.
Simulation waveforms of a new energy electric vehicle charging pile composed of four charging units Figure 8 shows the waveforms of a DC converter composed of three interleaved circuits. The reference current of each circuit is 8.33A, and the reference current of each DC converter is 25A, so the total charging current is 100A.
This DC charging pile and its control technology provide some technical guarantee for the application of new energy electric vehicles. In the future, the DC charging piles with higher power level, high frequency, high efficiency, and high redundancy features will be studied.
The advantage of DC charging pile is that the charging voltage and current can be adjusted in real time, and the charging time can be significantly shortened when the charging current are large, which is a more widely used charging method at present.
In [5, 6], the rectifier of the DC charging pile is an uncontrollable rectifier. When the uncontrollable rectifier works, it will inject large harmonic current into the AC grid, the harmonic current will affect the service life of the input transformer, increase the power grid loss, and cause voltage fluctuation.
This paper introduces a high power, high efficiency, wide voltage output, and high power factor DC charging pile for new energy electric vehicles, which can be connected in parallel with multiple modular charging units to extend the charging power and thus increase the charging speed.
This paper proposes a collaborative interactive control strategy for distributed photovoltaic, energy storage, and V2G charging piles in a single low-voltage distribution station. learn more.
In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV charging pile with integrated charging, discharging, and storage; Multisim software is used to build an EV charging model in order to simulate the charge control guidance module.
The simulation results of this paper show that: (1) Enough output power can be provided to meet the design and use requirements of the energy-storage charging pile; (2) the control guidance circuit can meet the requirements of the charging pile; (3) during the switching process of charging pile connection state, the voltage state changes smoothly.
The importance of maintaining charging piles lies in the fact that influences by the changeable environment and ageing inner parts can cause various faults. Regular examination and maintenance are necessary during both product storage and using processes.
Electric car charging piles are fixed structures on the ground that provide AC electric energy for electric cars with on-board chargers using special charging interfaces and conduction modes. They have corresponding communication, charging, and safety protection functions. (How to Charge an EV imported from China)
The maximum charging power of an AC charging pile is 7KW. The charging power of a DC charging pile is generally 60KW to 80KW. The input current of a single gun on a charging pile can reach 150A--200A. This is a significant demand on the power supply line. In some old communities, even installing one may not be possible.
An AC Charging pile is a charging solution for electric cars. It has a body made of brushed stainless steel, which is robust, rigid, anti-rust, and durable. AC Charging piles are ideal for both indoor home charging and public charging. They feature a QR code for mobile payment and standard charging ports for EV cars, E-taxis, and E-buses.
In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV charging pile with integrated charging, discharging, and storage; Multisim software is used to build an EV.
Energy storage charging piles lose power quickly in cold weather. Battery makers claim peak performances in temperature ranges from 50° F to 110° F (10 o C to 43 o C) but the optimum performance for.
Ma and Wang proposed using energy piles to store solar thermal energy underground in summer, which can be retrieved later to meet the heat demands in winter, as schematically illustrated in Fig. 1. A mathematical model of the coupled energy pile-solar collector system was developed, and a parametric study was carried out.
The heat-carrying fluid particle transports heat from the solar collector to the energy pile-soil system continuously. The rate of charging and discharging depends on the flowrate, the intensity of radiation, and the condition of the energy pile-soil system.
Quantitatively, the daily average rate of energy storage per unit pile length reaches about 200 W/m for the case in saturated soil with turbulent flowrate and high-level radiation. This is almost 4 times that in the dry soil. Under low-level radiation, it is about 60 W/m.
By the end of the first charging phase, the rate of energy storage per unit pile length in saturated soil is about 150 W/m higher than that in dry soil. The flowrate seems to have no significant effect on the evolution of the rate of energy storage during the first charging phase, except for cases in saturated soil.
In addition, the model domain of the energy pile-soil system has limited dimensions and thus only five cycles of energy storage were maintained for each test. These factors affect the results quantitatively, while they should not invalidate the fair comparison between different tests.
It indicates that both the inlet and outlet temperature of the energy pile undergo a rapid increase during the first hour. Then they increase quite slowly as the underground storage of solar thermal energy continues. The maximum inlet temperature is about 60 °C.
ESSs could be categorized according to multiple factors, including, intended applications, storage duration, storage efficiency, etc. Major ESS have been discovered and classified as thermal energy storage (TES) (such as thermo-chemical energy storage), mechanical energy storage (MES) (such as flywheel energy storage), chemical energy storage.
In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV charging pile with integrated charging, discharging, and storage; Multisim software is used to build an EV charging model in order to simulate the charge control guidance module.
Design of Energy Storage Charging Pile Equipment The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period.
The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period. In this section, the energy storage charging pile device is designed as a whole.
On the one hand, the energy storage charging pile interacts with the battery management system through the CAN bus to manage the whole process of charging.
The charging pile (as shown in Figure 1) is equivalent to a fuel tanker for a fuel car, which can provide power supply for an electric car.
Due to the urgency of transaction processing of energy storage charging pile equipment, the processing time of the system should reach a millisecond level. 3.3. Overall Design of the System
The energy storage charging pile achieved energy storage benefits through charging during off-peak periods and discharging during peak periods, with benefits ranging from 558. At an average demand of 70 % battery capacity, with 50–200 electric vehicles, the cost optimization decreased by 17.
In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV charging pile with integrated charging, discharging, and storage; Multisim software is used to build an EV charging model in order to simulate the charge control guidance module.
The energy storage charging pile achieved energy storage benefits through charging during off-peak periods and discharging during peak periods, with benefits ranging from 699.94 to 2284.23 yuan (see Table 6), which verifies the effectiveness of the method described in this paper.
Based Eq., to reduce the charging cost for users and charging piles, an effective charging and discharging load scheduling strategy is implemented by setting the charging and discharging power range for energy storage charging piles during different time periods based on peak and off-peak electricity prices in a certain region.
The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period. In this section, the energy storage charging pile device is designed as a whole.
On the one hand, the energy storage charging pile interacts with the battery management system through the CAN bus to manage the whole process of charging.
The simulation results of this paper show that: (1) Enough output power can be provided to meet the design and use requirements of the energy-storage charging pile; (2) the control guidance circuit can meet the requirements of the charging pile; (3) during the switching process of charging pile connection state, the voltage state changes smoothly.
The energy storage charging pile achieved energy storage benefits through charging during off-peak periods and discharging during peak periods, with benefits ranging from 558. At an average demand of 70 % battery capacity, with 50–200 electric vehicles, the cost optimization decreased by 17.
In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV charging pile with integrated charging, discharging, and storage; Multisim software is used to build an EV charging model in order to simulate the charge control guidance module.
Design of Energy Storage Charging Pile Equipment The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period.
The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period. In this section, the energy storage charging pile device is designed as a whole.
On the one hand, the energy storage charging pile interacts with the battery management system through the CAN bus to manage the whole process of charging.
Electric vehicle charging piles are different from traditional gas stations and are generally installed in public places. The wide deployment of charging pile energy storage systems is of great significance to the development of smart grids. Through the demand side management, the effect of stabilizing grid fluctuations can be achieved.
The charging pile determines whether the power supply interface is fully connected with the charging pile by detecting the voltage of the detection point. Multisim software was used to build an EV charging model, and the process of output and detection of control guidance signal were simulated and verified.
Contact us for competitive quotes on any of our energy storage and UPS products
Get a Quote